Place a 60-inch plank on the floor. Measure 1 inch from the edge and with a pencil place a mark, repeat the mark on the other end of the board. Draw a straight line on the markings on the ends of the planks, with a level or a carpenter’s square. Choose a drill that has the same diameter or one slightly smaller than the body of these screws. Put the drill into the drill.
Queen Beds At Walmart – Building a platform bed contains little more than making a box model with braces in the center and placing a solid piece on top. The platform must be able to support these dimensions with approximately 2 inches along the sides and at the foot of the bed to take into account the differences in sizes of the manufacturers.
Drill three pilot holes, at equal distances in the line drawn along the 60-inch planks. Place one of the 60-inch planks vertically and one of the 78-inch planks along the long edge. Set them in an L or 90 ° angle, one end of the cut side of the long plank against the short plank, through the pilot holes. Insert queen beds at walmart wood screws into the guide holes of the short plank and into the long plank with an electric drill.